What is NIC Teaming?

Windows Server 2012 NIC Teaming provides transparent network failover and bandwidth aggregation. Uniquely, the Windows solution is hardware-independent and can be deployed under all existing workloads and applications on both physical and virtualized servers.

What is NIC Teaming?

A solution commonly employed to solve the network availability and performance challenges is NIC Teaming. NIC Teaming (aka NIC bonding, network adapter teaming, Load balancing and failover, etc.) is the ability to operate multiple NICs as a single interface from the perspective of the system. In Windows Server 2012, NIC Teaming provides two key capabilities:
1.Protection against NIC failures by automatically moving the traffic to remaining operational members of the team, i.e., Failover, and
2.Increased throughput by combining the bandwidth of the team members as though they were a single larger bandwidth interface, i.e., bandwidth aggregation.

Many vendors have provided NIC teaming solutions for Windows Server, but these solutions shared many limitations. Those solutions are typically tied to a particular NIC manufacturer, so you cannot always team together NICs from multiple vendors. Many of the solutions do not integrate well with other networking features of Windows Server or with features such as Hyper-V. Finally, each of these NIC teaming solutions is managed differently, and most cannot be managed remotely. As a result, it is not easy for an administrator to move from machine to machine in a heterogeneous environment and know how to configure NIC teaming on each host.

NIC Teaming in Windows Server 2012

Windows Server 2012 includes an integrated NIC Teaming solution that is easy to setup and manage, is vendor independent, and that supports the performance optimizations provided by the underlying NICs.

NIC Teaming is easily managed through PowerShell or a powerful, intuitive UI (the UI is layered on top of PowerShell). Teams can be created, configured, monitored, and deleted at the click of a mouse. Multiple servers can be managed at the same time from the same UI. Through the power of PowerShell remote management the NIC Teaming UI can be run on Windows 8 clients to remotely manage servers even when those servers are running Windows 2012 Server Core!

A team can include NICs from any vendor – and it can even include NICs from multiple vendors. This vendor-agnostic approach brings a common management model to even the most heterogeneous datacenter. New NICs can be added to systems as needed and effortlessly integrated to the existing NIC Teaming configuration.

Finally, the team supports all the networking features that the underlying NICs support, so you don’t lose important performance functionality implemented by the NIC hardware. The “no compromise” approach means that NIC Teaming can be deployed with confidence on all servers.

NIC Teaming Configuration Options

NIC Teaming in Windows Server 2012 supports two configurations that meet the needs of most datacenter administrators.

Customers who value route diversity (in order to withstand switch failures) can connect their hosts to different switches. In this “Switch Independent Mode,” the switches are not aware that different interfaces on the server comprise a team. Instead, all the teaming logic is done exclusively on the server. Many customers choose to operate in an active/active mode, where traffic is spread across both NICs until a failure occurs. Historically some customers prefer to operate in an active/standby mode where all the traffic is on one team member until a failure occurs. When a failure is detected all the traffic moves to the standby team member. This mode of operation also can be created in Switch Independent mode teaming. The real tradeoff is what happens when there is a failure. If you’ve configured active/standby then you will have the same level of performance in a failure condition whereas you’ll have degraded performace if you go with the active/active mode. On the other hand, when you don’t have a failure, you’ll have much greater bandwidth using active/active.

In addition to achieving reliability, customers can also choose to aggregate bandwidth to a single external switch using NIC Teaming. This is done by creating a team in a “Switch Dependent Mode” wherein all NICs that comprise the team are connected to the same switch. There are two common varieties of Switch Dependent teams: Those that use no configuration protocol, a method often called static or generic teaming, and a mode that uses the IEEE 802.1ax Link Aggregation Control Protocol (LACP) to coordinate between the host and the switch. Both of these models are fully supported in Windows Server 2012. For more details on the modes of operation and load distribution schemes, please refer to the NIC Teaming User’s Guide.

Switch Dependent Mode treats the members of the team as an aggregated big pipe with a minor restriction (explained below). Each side balances the load between the team members independent of what the other side is doing. And, subject to the minor restriction, the pipe is kept full in both directions.

What is that minor restriction? TCP/IP can recover from missing or out-of-order packets. However, out-of-order packets seriously impact the throughput of the connection. Therefore, teaming solutions make every effort to keep all the packets associated with a single TCP stream on a single NIC so as to minimize the possibility of out-of-order packet delivery. So, if your traffic load comprises of a single TCP stream (such as a Hyper-V live migration), then having four 1Gb/s NICs in an LACP team will still only deliver 1 Gb/s of bandwidth since all the traffic from that live migration will use one NIC in the team. However, if you do several simultaneous live migrations to multiple destinations, resulting in multiple TCP streams, then the streams will be distributed amongst the teamed NICs.

Configuring NIC Teaming in Windows Server 2012

As mentioned previously, NIC Teaming provides a rich PowerShell interface for configuring and managing teams either locally or remotely. Moreover, for those who prefer a UI based management model, the NIC Teaming UI is a complete management solution that runs PowerShell under the covers. Both PowerShell and UI administration are covered in depth in the NIC Teaming User’s Guide. Below are some highlights that show just how easy it is to setup NIC Teaming.

Suppose you have a server with four NICs: NIC1, NIC2, NIC3, and NIC4. In order to put NIC1 and NIC2 in a team, you can run this PowerShell command as an administrator:

New-NetLbfoTeam MyTeam NIC1,NIC2

When the command returns, you will have a team with the name “MyTeam” and team members NIC1 and NIC2, setup in Switch Independent mode. It is also simple to make more advanced changes. For example the PowerShell cmdlet below will create a team as an LACP team to be bound to the Hyper-V switch.

New-NetLbfoTeam MyTeam NIC1,NIC2 –TeamingMode Lacp
–LoadBalancingAlgorithm HyperVPorts

As noted earlier, you could use the UI instead to achieve the same results. The NIC Teaming UI can be invoked from Server Manager or by invoking lbfoadmin.exe at a command prompt. The UI is available on Windows Server 2012 configurations that have local UI and on Windows Server 2012 or Windows 8 systems that run the Remote Server Administration Tools (RSAT). The UI can manage multiple servers simultaneously. .

Now you can create a new team. Select the NICs you want to team (control-click each NIC) then right-click the group and click on Add to New Team:

This will bring up the New Team dialog. Enter the team name.

You can configure the team further to support the teaming mode and other properties.

Now the team is set up. It is easy to make changes to the team through the Team TASKS dropdown or by right-clicking on the team.

If you want to modify the team to be an active/standby team, simply right click on the team and select Properties.

This will bring up the Team Properties dialog. Click on the additional properties drop-down, then the Standby adapter drop-down, and select the standby NIC.

After you select OK to apply the change you will see that the NIC is now in Standby mode:


NIC Teaming in Windows Server 2012 enables continuous network availability and increased network performance for all workloads even when the team comprises of NICs from multiple vendors. NIC Teaming can be managed easily using PowerShell or the built-in NIC Teaming UI. NIC Teaming enables greater workload density while reducing operational costs for your private, public, and hybrid cloud deployments.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: